805313619 - SOLENOID OPERATED CARTRIDGE SV08-34-04-00-00-B-00 - DANFOSS
Description: SV08-34-04-00-00-B-00
Function: 4 WAY-3 POS ON-OFF SPOOL VALVE
Solenoid Valve, 4-way, 3-position, Spool Type 230 bar [3300 psi] • 8 l/min [2 US gpm]
This is a 4-way, 3-position, spool type, direct acting solenoid valve. In the center condition, ports 2 and 4 are closed while port 3 is connected to port 1. By energizing one coil, port 3 opens to 2 and port 4 to 1. When energizing the other coil, port 3 opens to 4 and port 2 to 1. This valve provides a directional control function with a neutral de energized state allowing the inlet flow to pass to tank or to another function while the work ports are blocked. It can be used in any hydraulic application where an actuator needs to be controlled in both directions.
805314219 - SOLENOID OPERATED CARTRIDGE SV10-24-01-00-00-B-00 - DANFOSS
Solenoid Valve, 4-way, 2-position, Spool Type
230 bar [3300 psi] • 35 l/min [9 US gpm]
This is a 4-way, 2-position, spool type, direct acting solenoid valve. In the de-energized, condition port 3 is open to 2 and port 4 to 1. When energized port 3 is open to 4 and port 2 to 1. These valves are used to control the movement of cylinders or motors able to reverse the motion. Always check the  operating envelope to make sure the valve will work under the required application conditions. Port 1 is not intended for use as an inlet (Tank only).
805347319 - SOLENOID OPERATED CARTRIDGE SV10-24-12-00-00-B-00 - DANFOSS
Description: SV10-24-12-00-00-B-00
Function: 4 WAY-2 POS ON-OFF SPOOL VALVE
Solenoid Valve, 4-way, 2-position, Spool Type 230 bar [3300 psi] • 25 l/min [6.6 US gpm]
This is a 4-way, 2-position, spool type, direct acting solenoid valve. In the de-energized condition, port 3 is open to 1 while ports 2 and 4 are blocked. When energized, port 1 is open to 4 and port 2 open to 3. This valve allows the inlet oil to pass through the valve to tank or a separate system while holding the actuator in position. Always check the operating envelope to make sure the valve will work under the required application conditions. Port 1 is not intended as inlet (Tank only).
850168919 - DIRECTIONAL CONTROL VALVE PSV10-34-05-00-00-22-B-00 - DANFOSS
Description: PSV10-34-05-00-00-22-B-00
Function: Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 
850223019 - DIRECTIONAL CONTROL VALVE PSV10-34-05-00-00-12-B-00 - Danfoss
Description: PSV10-34-05-00-00-12-B-00
Function:  Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 
11226438 - DIRECTIONAL CONTROL VALVE PSV10-34-05-00-00-3-B-00 - Danfoss
Description: PSV10-34-05-00-00-3-B-00
Function:  Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions.