Hydraulic Valves

CV08-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 38 l/min [10 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Danfoss Seal kit last longer than other brands' kit, we suggest you use original spare parts.

* Image for illustration purposes only

Needle valve CP610-7-B-0E Comatrol, bi-directional, fine metering, reverse free flow. This valve has a free flow from 1 to 2 and a choke effect from 2 to 1.

Counterbalance Valve - Standard pilot ratio 4,5:1

Using Danfoss Genuine Parts you can guarantee maximum reliability of your equipment, maximizing productivity and performance. By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.
Function: M16 DIN 43650

Using Danfoss Genuine Parts you can guarantee maximum reliability of your equipment, maximizing productivity and performance. By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.

Danfoss Seal kit last longer than other brands' kit, we suggest you use original spare parts.

Perché utilizzare ricambi originali Danfoss?
Maggior efficienza dei componenti e del sistema
Prevenire guasti futuri
Maggiore sicurezza
Ecologici
Aumento della durata del sistema fino al 50%!

Solenoid Valve, 2-way, Poppet Type, Normally Closed, Pilot Operated with Reverse Free Flow.
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 and from 1 to 2. Some models have the option of a filter at port 2. Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position or to interrupt a pressure line where flow normally passes in both directions.