Directional

Description: 1SH10
Load Shuttle Valve, Insert type 3S0 bar [S000 psi] • 20 I/min [S US gpm]
This valve senses the higher of two input pressures at 1 and 3, and routs it to output 2. 

Logic Element, Normally Closed, Spool Type, Pilot-to-Close350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATIONThis is a 3-port, normally closed, spool-type logic element with pilot-to-close functionality.When port 3 is open to tank, flow is allowed from port 1 to port 2.Flow from port 1 to port 2 is otherwise blocked unless the pressure at port 1 exceeds the spring setting.
Applying pilot pressure to port 3 increases the required opening pressure at port 1 at a 1:1 ratio.
This valve is ideal for use as a pressure compensator, bypass valve, or pilot-to-close element in regenerative hydraulic circuits.

Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits