Hydraulic

Description: CP710-1-B-0-C-080-S2
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. It is available in normally open or normally closed configurations between ports 2 and 3, which shift when the pilot pressure at port 1 overcomes the opposing spring. Due to the atmospheric vent, the pilot pressure required to shift the valve is independent of the pressure in the line between port 2 and port 3. 

Description: CP710-1-B-0-O-080-S2
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. It is available in normally open or normally closed configurations between ports 2 and 3, which shift when the pilot pressure at port 1 overcomes the opposing spring. Due to the atmospheric vent, the pilot pressure required to shift the valve is independent of the pressure in the line between port 2 and port 3. 

Description: CP712-11-U-0-C-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Description: CP712-11-U-0-O-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
210 bar [3000 psi] • 40 l/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description:  CP240-5-B-0-E-C-XXX
Function: Sequence Valve, Normally Open, Spool Type, Hydraulic Pilot, External Drain
Sequence Valve, Normally Open, Spool Type, Hydraulic Pilot, External Drain 210 bar [3000 psi]• 25 I/min [7 US gpm] 
This is a hydraulically pilot operated spool valve, normally open from port 2 to 3 with port 4 as a drain port connected to tank. When the pilot pressure on port 1 reaches the setting, the valve will begin to close port 2 to 3. This is ideal for sensing pressure in a remote area of a circuit to sequence another operation. 

Description: PSV10-10-S-0-24
Function: Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, External Drain
Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, External Drain 210 bar [3000 psi]• 23I/min [6 US gpm] 
This is a hydraulically pilot operated spool valve, normally closed from port 2 to 3 with port 4 as a drain port connected to tank. When the pilot pressure on port 1 reaches the setting, the valve will begin to open port 2 to 3. This is ideal for sensing pressure in a remote area of a circuit to sequence another operation

Description: VDP 06/NC-EN-1-00-XXX
Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, Atmospheric Vent 315 bar [4600 psi]• 25 I/min [7 US gpm] 
This is a hydraulically pilot operated spool valve, normally closed from port 2 to 3 with an atmospheric vent. When the pilot pressure on port 1 reaches the setting, the valve will begin to open port 2 to 3. This is deal for sensing pressure in a remote area of a circuit to sequence another operation. 

The accumulator sense, pump unload pilot valve is used to sense pressure in an accumulator at port 1 of the valve and when the pressure at port 1 reaches the valve setting, port 2 connects to port 3 to vent a relief valve and unload the pump. This valve has a 20% ratio between unload setting and reset; when pressure at port 1 falls below 80% of the valve setting, port 2 is blocked from port 3 and the pump will come back online to recharge the accumulator. This valve requires a separate check valve between port 1 and the pump. Another version of the accumulator sense, pump unload valve, QCDB, includes a free-flow check valve for pump flows under 12 gpm (50 L/min)