Logic Element

Description: HLE10-OPO-2.75-B-00
Function: Logic Element, Normally Open, Spool Type, Pilot to Open
Logic Element, Normally Open, Spool Type, Pilot to Open 350 bar [S000 psi] • 60 I/min [16 US gpm] 
This is a 3-ported, normally open, pilot to open, spool type logic element. Flow is open from port 2 to port 1, until pressure in port 1 is sufficient to overcome the spring set pressure plus any pressure in port 3. The pressure in port 3 can be controlled remotely making the valve ideal for use as a normally open on/off element in a pressure reducing function. This valve is most commonly used as a pressure compensator in conjunction with a proportional directional valve. 

Description: HLE10-OPO-5.5-B-00
Function:Logic Element, Normally Open, Spool Type, Pilot to Open
Logic Element, Normally Open, Spool Type, Pilot to Open 350 bar [S000 psi] • 60 I/min [16 US gpm] 
This is a 3-ported, normally open, pilot to open, spool type logic element. Flow is open from port 2 to port 1, until pressure in port 1 is sufficient to overcome the spring set pressure plus any pressure in port 3. The pressure in port 3 can be controlled remotely making the valve ideal for use as a normally open on/off element in a pressure reducing function. This valve is most commonly used as a pressure compensator in conjunction with a proportional directional valve. 

Description: HLE10-OPO-7.5-B-00
Function:Logic Element, Normally Open, Spool Type, Pilot to Open
Logic Element, Normally Open, Spool Type, Pilot to Open 350 bar [S000 psi] • 60 I/min [16 US gpm] 
This is a 3-ported, normally open, pilot to open, spool type logic element. Flow is open from port 2 to port 1, until pressure in port 1 is sufficient to overcome the spring set pressure plus any pressure in port 3. The pressure in port 3 can be controlled remotely making the valve ideal for use as a normally open on/off element in a pressure reducing function. This valve is most commonly used as a pressure compensator in conjunction with a proportional directional valve. 

Description: HLE10-OPO-10-B-00
Function:Logic Element, Normally Open, Spool Type, Pilot to Open
Logic Element, Normally Open, Spool Type, Pilot to Open 350 bar [S000 psi] • 60 I/min [16 US gpm] 
This is a 3-ported, normally open, pilot to open, spool type logic element. Flow is open from port 2 to port 1, until pressure in port 1 is sufficient to overcome the spring set pressure plus any pressure in port 3. The pressure in port 3 can be controlled remotely making the valve ideal for use as a normally open on/off element in a pressure reducing function. This valve is most commonly used as a pressure compensator in conjunction with a proportional directional valve. 

Description: HLE10-OPO-13-B-00
Function:Logic Element, Normally Open, Spool Type, Pilot to Open
Logic Element, Normally Open, Spool Type, Pilot to Open 350 bar [S000 psi] • 60 I/min [16 US gpm] 
This is a 3-ported, normally open, pilot to open, spool type logic element. Flow is open from port 2 to port 1, until pressure in port 1 is sufficient to overcome the spring set pressure plus any pressure in port 3. The pressure in port 3 can be controlled remotely making the valve ideal for use as a normally open on/off element in a pressure reducing function. This valve is most commonly used as a pressure compensator in conjunction with a proportional directional valve. 

Description: CP701-1-B-0-170
Function: Logic Element, Normally Closed, Spool Type, Pilot to Close
Logic Element, Normally Closed, Spool Type, Pilot to Close 3S0 bar [S000 psi]• 1 SO I/min [40 US gpm] 
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits. 

Description: CP300-4-B-0-0-080
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm] 
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve. 

Description: CP300-4-B-0-0-110
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm] 
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve. 

Description: CP300-4-B-0-0-150
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm] 
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve. 

Description: CP300-4-B-0-0-190
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm] 
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve. 

Description: VLP12/P2-B-00
Logic Element Poppet, Double Blocking Closed, Vent to Open 315 bar [4600 psi] • 160 l/min [42 US gpm]
This is a 3-ported, normally closed, double blocking poppet type logic element, with port 1 connected to port 3 through an orifice. By opening port 3 to tank, flow can pass from port 1 to port 2 but not from port 2 to port 1. Closing port 3 will prevent the valve from opening from port 1 to port 2. The area ratio between port 1 and 3 is 1 to 1 and port 2 is balanced between the seat diameter and the seal poppet diameter. By controlling the flow or pressure out of port 3 the valve can be used as an on/ off valve or in a pressure control function.