Home

Subcategories

Hydraulics

In this category you can find all the hydraulic products: engines, pumps, valves, idroguides.

83019507 - 2-WAY - SVP08-NC-00-00-M-B-00 - DANFOSS
83019507 - 2-WAY - SVP08-NC-00-00-M-B-00 - DANFOSS
Solenoid Valve, 2-way, Poppet Type, Normally Closed, Pilot Operated 230 bar
[3300 psi] • 35 l/min [9 US gpm]
OPERATION AND DESCRIPTION
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 but is restricted in the opposite direction. Some models have the option of a filter at port 2. Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position and bypass excess oil to tank
Sign-in Sign-in  
83021066 - 4-WAY - SV15-34-04-00-00-B-00 - DANFOSS
83021066 - 4-WAY - SV15-34-04-00-00-B-00 - DANFOSS
[3300 psi] • 50 l/min [13.2 US gpm]
This is a 4-way, 3-position, spool type, direct acting solenoid valve. In the center condition, ports 2 and 4 are closed while port 3 is connected to port 1. By energizing one coil, port 3 opens to 2 and port 4 to 1. When energizing the other coil, port 3 opens to 4 and port 2 to 1. This valve provides a directional control function with a neutral de energized state allowing the inlet flow to pass to tank or to another function while the work ports are blocked. It can be used in any hydraulic application where an actuator needs to be controlled in both directions. Always check the operating envelope to make sure the valve will work under the required application conditions. Port 1 is not intended for use as inlet (Tank only)
Sign-in Sign-in  
131542 - LOGIC ELEMENT - CP701-1-B-0-100 - DANFOSS
131542 - LOGIC ELEMENT - CP701-1-B-0-100 - DANFOSS
Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits
Sign-in Sign-in  
566449 - LOGIC ELEMENT - DPS2-10-B-F-0-80 - DANFOSS
566449 - LOGIC ELEMENT - DPS2-10-B-F-0-80 - DANFOSS
Logic Element, Normally Closed, Poppet Type, Vent to Open
350 bar [5000 psi] • 60 l/min [16 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, vent to open, poppet type logic element with port 1 connected to port 3 through an orifice. By opening port 3 to tank, flow can pass from port 1 to port 2 or from port 2 to port 1. Closing port 3 will prevent the valve from opening from port 1 to port 2, but flow can still take place from port 2 to port 1. The area ratio between port 1 and 3 is 1:2 and the ratio between port 1 and 2 is also 1:2. By controlling the flow or pressure out of port 3, the valve can be used as an on/off valve or in a pressure control function. 
Sign-in Sign-in  
138459 - LOGIC ELEMENT - CP701-1-B-0-190 - DANFOSS
138459 - LOGIC ELEMENT - CP701-1-B-0-190 - DANFOSS
Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits.
Sign-in Sign-in  
131440 - LOGIC ELEMENT - CP701-1-B-0-080 - DANFOSS
131440 - LOGIC ELEMENT - CP701-1-B-0-080 - DANFOSS
Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits.
Sign-in Sign-in  
805314919 - 2-WAY - SVP08-NC-00-00-B-00 - DANFOSS
805314919 - 2-WAY - SVP08-NC-00-00-B-00 - DANFOSS
Solenoid Valve, 2-way, Poppet Type, Normally Closed, Pilot Operated 230 bar
[3300 psi] • 35 l/min [9 US gpm]
OPERATION AND DESCRIPTION
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 but is restricted in the opposite direction. Some models have the option of a filter at port 2. Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position and bypass excess oil to tank
Sign-in Sign-in  
171188019 - COIL D14E-12D-1.8A-DN - DANFOSS
171188019 - COIL D14E-12D-1.8A-DN - DANFOSS
12V DIN 43650
Using Danfoss Genuine Parts you can guarantee maximum reliability of your equipment, maximizing productivity and performance. By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.
Sign-in Sign-in