Hydraulic Valves

Free flow nose to side check valve
Capacity: 80 L/min. | Cavity: T-13A
Control: X
Cracking pressure: F
Seal material: N

Free flow nose to side check valve
Capacity: 80 L/min. | Cavity: T-13A
Control: X
Cracking pressure: A
Seal material: N

Description: SAE-XX-2N

Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier

This valve allows free Flow from 1 to 2 and blocks flow from 2 to 1.

CV08-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 38 l/min [10 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: SAE-08-2N 3/8"G Steel
Ports A/B: G 3/8
Cavity: CA-08A-2N

Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
210 bar [3000 psi] • 40 l/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description: M16-12D-26W-DE
Function: M16 Deutsch
Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier

CV10-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 80 l/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1

Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier

SV08-34-05
Solenoid Valve, 4-way, 3-position, Spool Type
230 bar [3300 psi] • 12 l/min [3.2 US gpm]

CV10-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 80 l/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1

Solenoid Valve, 4-way, 2-position, Spool Type
230 bar [3300 psi] • 35 l/min [9 US gpm]
This is a 4-way, 2-position, spool type, direct acting solenoid valve. In the de-energized, condition port 3 is open to 2 and port 4 to 1. When energized port 3 is open to 4 and port 2 to 1. These valves are used to control the movement of cylinders or motors able to reverse the motion. Always check the  operating envelope to make sure the valve will work under the required application conditions. Port 1 is not intended for use as an inlet (Tank only).

Flow Divider/Combiner, Fixed Ratio, Flow Synchronizing Option 
210 bar [3000 psi] • 45 l/min [12 US gpm]
This is a fixed ratio flow divider/combiner valve. In dividing mode, flow enters port 3 and passes across two fixed orifices in linked spools. If the pressure drop through one orifice is higher than the other, then the spools will move together to restrict the flow in the lower pressure outlet port. This maintains  equal pressure drops across the spools, thus maintaining the flow division in the outlet ports. In combining mode, flow will enter ports 2 and 4 pass  through the orifices, which causes the spools to move to restrict the higher-pressure inlet and maintain equal pressure drops and equal flow into the  valve.

Function: R13 Deutsch
Description: R13-12D-16W-DE

Description: CV10-NP-1-B-00 (NEW)
Function: Check valve 1bar
Check Valve, Standard Direction 350 bar [5000 psi]• 801/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes piace from port 1 to 2 and is blocked from port 2 to 1.

Description: CV10-NP-2-B-00 (NEW)
Function: Check valve 2bar
Check Valve, Standard Direction 350 bar [5000 psi]• 801/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes piace from port 1 to 2 and is blocked from port 2 to 1.

Description: CV10-NP-7-B-00 (NEW)
Function: Check valve 7bar
Check Valve, Standard Direction 350 bar [5000 psi]• 801/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes piace from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-5.0
Function: Check valve <1bar

Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-20
Function: Check valve 1bar
Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-40
Function: Check valve 3bar
Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-80
Function: Check valve 5bar
Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.