Danfoss

Solenoid Valve, 2-Way, Poppet Type, Normally Closed, Pilot Operated230 bar [3300 psi] • 80 l/min [21 US gpm]
OPERATION AND DESCRIPTIONThis is a 2-way, 2-position, pilot-operated, poppet-type solenoid valve, normally closed in its de-energized state.When de-energized, flow is allowed from port 1 to port 2, while flow in the opposite direction is blocked.When energized, flow is allowed from port 2 to port 1, while reverse flow is restricted.

Some models are available with an optional filter at port 2.Thanks to the low leakage design of the poppet construction, these valves are ideal for applications requiring load holding or for safely diverting excess oil to tank.

Description: PRR10-PVG-E-24-B-00
Pressure Reducing Valve, Non-Relieving, Direct Acting 210 bar [3000 psi]• SI/min [1.3 US gpm] 
This is a normally open, direct acting pressure reducing valve. Port 2 is open to port 1 until the setting is reached at which time the valve throttles the outlet flow limiting the pressure. Port 3 is a drain port only, as the valve does not contain a relief function. This valve, is ideal for stable and precise control of a secondary pressure within a circuit. 

Solenoid Valve, 3-way, 2-position, Poppet Type
230 bar [3300 psi] • 25 l/min [6.6 US gpm]
OPERATION AND DESCRIPTION
This is a 3-way, 2-position, poppet type, direct acting solenoid valve. When de-energized, the valve blocks flow from port 3 while allowing flow between port 1 and 2. When energized, the valve poppet blocks fow from port 1 while allowing flow between port 2 and 3. These valves come standard with a push pin manual override. This valve is ideal for low leakage requirements to hold a load in position.

Distributors can choose from two standard dual body designs for multi-function circuits.
These dual bodies will be available in both cross port and parallel circuit types.
Threaded plug options are included to allow for design flexibility.
Four sizes are available to house -8, -10, -12, and -16 two-way cartridges.
Aluminum and steel versions with SAE or BSP ports can be selected.
• Bodies designed for Two, 2-way Cartridges
• Cross-Port and Parallel Designs
• -8, -10, -12, -16 Body Sizes
• Aluminum and Steel • SAE and BSP Porting
• Threaded Plug Options Available for More Flexibility (Parallel Bodies)

Description: PRR10-PVG-E-13-B-00
Pressure Reducing Valve, Non-Relieving, Direct Acting 210 bar [3000 psi]• SI/min [1.3 US gpm] 
This is a normally open, direct acting pressure reducing valve. Port 2 is open to port 1 until the setting is reached at which time the valve throttles the outlet flow limiting the pressure. Port 3 is a drain port only, as the valve does not contain a relief function. This valve, is ideal for stable and precise control of a secondary pressure within a circuit. 

Description: CP104-2-B-0 (NEW)
Function: Check valve <1bar reverse
Check Valve, Reverse Direction 350 bar [5000 psi]• 4.5 I/min [1.2 US gpm]
This is a check valve where free flow takes place from port 2 to 1 and is blocked from port 1 to 2.

Description: CP124-1-B-0 
Load Shuttle Valve  350 bar [S000 psi] • 3.71/min [1 US gpm]
This valve senses the higher of the two input pressures at ports 1 and 3 and routes it to the output port 2

Load Shuttle Valve
315 bar [4600 psi] • 22 l/min [5.8 US gpm]
DESCRIPTION AND OPERATION
This valve senses the higher of the two input pressures at ports 1 and 3 and routes it to the output port 2.

CV08-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 38 l/min [10 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

This valve allows free Flow from 1 to 2 and blocks flow from 2 to 1.

CV08-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 38 l/min [10 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

CV10-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 80 l/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1