Pressure Control

Pilot-operated, pressure reducing/relieving valve
Capacity: 40 L/min. | Cavity: T-11A
Control: L
Cracking Pressure: A
Seal Material: N

Pilot-operated, pressure reducing/relieving valve
Capacity: 40 L/min. | Cavity: T-11A
Control: L
Cracking Pressure: B
Seal Material: N

Description: CP210-2-B-0-E-C-250
This is a pilot operated spool type relief valve that relieves pressure from 1 to 2.

Decription: RV08-DR-2-E-XXX-B-00

Relief valve, Pilot Operated, Spool Type with Reverse Free Flow
250 bar [3600 psi] • 120 l/min [32 US gpm]
DESCRIPTION AND OPERATION
This is a pilot operated, poppet type relief valve that relieves from port 1 to port 2 with an integrated reverse flow check valve from port 2 to 1. Due to its unique poppet design, this valve offers faster response than a typical pilot operated valve. It can be used to limit pressure in a system or on a service line of a directional valve. It maintains accurate pressure control with constant or varying flows, while also allowing make up flow through in the reverse direction

 Relief valve, Pilot Operated, Spool Type with Reverse Free Flow
250 bar [3600 psi] • 120 l/min [32 US gpm]
DESCRIPTION AND OPERATION
This is a pilot operated, poppet type relief valve that relieves from port 1 to port 2 with an integrated reverse flow check valve from port 2 to 1. Due to its unique poppet design, this valve offers faster response than a typical pilot operated valve. It can be used to limit pressure in a system or on a service line of a directional valve. It maintains accurate pressure control with constant or varying flows, while also allowing make up flow through in the reverse direction

Relief Valve, Direct Acting, Poppet Type with Dampening
315 bar [4600 psi] • 40 l/min [11 US gpm]
DESCRIPTION AND OPERATION
This is a direct acting, poppet type relief valve that relieves from port 1 to 2. It features a highly damped poppet for smooth and stable response It can be used as a cost-effective main relief or to protect an actuator from over-pressurization.

RV08-DR-1-E-XXX-B-00 - DANFOSS

Description: PRV10-POC-215-C-00-00-E-B-00  
Proportional Relief Valve, Spool Type, Pilot Operated, Normally Closed 250 bar [3600 psi] • 76 l/min [20 US gpm] 
This is a pilot operated, spool type, normally closed, proportional relief valve. In the de-energized condition, the pressure setting will be at a maximum. As current is applied to the coil, the pressure setting of the valve will decrease proportionally. This valve is ideal for use in cooling circuits to regulate the speed of the fan.

Description: PRV12-10-S-0-15/
Pressure Reducing Valve, Relieving, Pilot Operated
350 bar [5000 psi] • 45  l/min [12 US gpm]
This is a normally open, pilot operated pressure reducing valve. Port 2 is open to port 1 until the setting is reached, at which time the valve throttles the outlet flow limiting the pressure. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for stable and precise control of a secondary pressure within a circuit.

Description: PRR10-PVG-E-24-B-00
Pressure Reducing Valve, Non-Relieving, Direct Acting 210 bar [3000 psi]• SI/min [1.3 US gpm] 
This is a normally open, direct acting pressure reducing valve. Port 2 is open to port 1 until the setting is reached at which time the valve throttles the outlet flow limiting the pressure. Port 3 is a drain port only, as the valve does not contain a relief function. This valve, is ideal for stable and precise control of a secondary pressure within a circuit. 

Description: PRR10-PVG-E-13-B-00
Pressure Reducing Valve, Non-Relieving, Direct Acting 210 bar [3000 psi]• SI/min [1.3 US gpm] 
This is a normally open, direct acting pressure reducing valve. Port 2 is open to port 1 until the setting is reached at which time the valve throttles the outlet flow limiting the pressure. Port 3 is a drain port only, as the valve does not contain a relief function. This valve, is ideal for stable and precise control of a secondary pressure within a circuit. 

Description:  PRMP 064-E-3-00-XXX
Pressure Reducing, Relieving, Pilot Operated 315 bar [4600 psi]• 40 I/min [11 US gpm] 
This is a normally open, pilot operated pressure reducing valve. Port 2 is open to port 1 until the setting is reached, at which time the valve throttles the outlet flow limiting the pressure. If the outlet pressure rises due to an external force.,then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for stable and precise control of a secondary pressure within a circuit. 

Description:  PRMP 064-E-2-00-XXX
Pressure Reducing, Relieving, Pilot Operated 315 bar [4600 psi]• 40 I/min [11 US gpm] 
This is a normally open, pilot operated pressure reducing valve. Port 2 is open to port 1 until the setting is reached, at which time the valve throttles the outlet flow limiting the pressure. If the outlet pressure rises due to an external force.,then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for stable and precise control of a secondary pressure within a circuit. 

Description:  PRMP 064-E-1-00-XXX
Pressure Reducing, Relieving, Pilot Operated 315 bar [4600 psi]• 40 I/min [11 US gpm] 
This is a normally open, pilot operated pressure reducing valve. Port 2 is open to port 1 until the setting is reached, at which time the valve throttles the outlet flow limiting the pressure. If the outlet pressure rises due to an external force.,then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for stable and precise control of a secondary pressure within a circuit. 

Description: PRV1-10-S-0-24/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: PRV1-10-S-0-12/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: PRV1-10-S-0-6/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: PRV1-10-S-0-2/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: PRV12-10-S-0-50/
Pressure Reducing Valve, Relieving, Pilot Operated
350 bar [5000 psi] • 45  l/min [12 US gpm]
This is a normally open, pilot operated pressure reducing valve. Port 2 is open to port 1 until the setting is reached, at which time the valve throttles the outlet flow limiting the pressure. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for stable and precise control of a secondary pressure within a circuit.

Description:PPR09-POD-20-00-00-B-00
Proportional Pressure Reducing, Relieving, Pilot Operated, Normally Open to Drain 50 bar [725 psi] • 25I/min [6.6 US gpm] 
This is a pilot operated, proportional pressure reducing/ relieving valve.In the de-energized condition, the inlet port 2 is blocked, while the reduced pressure in port 3 will be at the minimum setting and open to the tank port 4.By energizing the coil, the pressure in port 3 will increase proportionally to the current applied.Flow through port 2 to 3 is restricted to limit the pressure in port 3.In the case of over pressurization in port 3,the spool will open port 3 to port 4, which acts as a relief valve to limit the pressure in port 3.These valves are ideal for clutch control or as pilot valves for large directional control valves. 

Description:PPR09-POD-25-00-00-B-00
Proportional Pressure Reducing, Relieving, Pilot Operated, Normally Open to Drain 50 bar [725 psi] • 25I/min [6.6 US gpm] 
This is a pilot operated, proportional pressure reducing/ relieving valve.In the de-energized condition, the inlet port 2 is blocked, while the reduced pressure in port 3 will be at the minimum setting and open to the tank port 4.By energizing the coil, the pressure in port 3 will increase proportionally to the current applied.Flow through port 2 to 3 is restricted to limit the pressure in port 3.In the case of over pressurization in port 3,the spool will open port 3 to port 4, which acts as a relief valve to limit the pressure in port 3.These valves are ideal for clutch control or as pilot valves for large directional control valves. 

Description: 1PS100P20S 
Function: Sequence Valve, Pilot Operated, Spool Type, Internal Pilot, External Drain
Sequence Valve, Pilot Operated, Spool Type, Internal Pilot, External Drain 
3S0 bar [S000 psi]• 1S0 I/min [40 US gpm] 
This is a pilot operated, spool type sequence valve that opens from port 1 to port 2 when the setting is reached. This is ideal for sequencing a secondary operation while maintaining pressure in the primary operation, limiting pressure loss with constant or varying flows.