Directional

Description: CP100-2-B-0-005
Function: Check valve <1bar reverse
Check valve, Standard Direction 350 bar [5000psi] - 50/min [13 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

CV08-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 38 l/min [10 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: CP104-2-B-0 (NEW)
Function: Check valve <1bar reverse
Check Valve, Standard Direction 350 bar [5000 psi]• 80 I/min [21 US gpm]
DESCRIPTION AND OPERATION: this is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1

Description: CP104-2-B-0 (NEW)
Function: Check valve <1bar reverse
Check Valve, Reverse Direction 350 bar [5000 psi]• 4.5 I/min [1.2 US gpm]
This is a check valve where free flow takes place from port 2 to 1 and is blocked from port 1 to 2.

Description: CV3-4-P-000-05-00
Function: Check valve <1bar
Check Valve, Standard Direction 3S0 bar [S000 psi]• 7.6I/min [2 US gpm]
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1. 

Description: PSV10-34-05-00-00-22-B-00
Function: Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 

Description: PSV08-34-05-00-00-12-B-00
Function: Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
240 bar [3500 psi]• 12I/min [3.2 US gpm] 

Description: PSV10-34-05-00-00-12-B-00
Function:  Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 

Description: PSV10-34-05-00-00-3-B-00
Function:  Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 

Description: SV10-35-02-00-00-B-00
Function: Solenoid Valve, 5-way, 3-position, Spool Type
Solenoid Valve, 5-way, 3-position, Spool Type 
230 bar [3300 psi] • 30 I/min [8 US gpm]

Desciption:SV10-35-05-00-00-B-00
Function: Solenoid Valve, 5-way, 3-position, Spool Type
Solenoid Valve, 5-way, 3-position, Spool Type 230 bar [3300 psi] • 30 I/min [8 US gpm] 

Description: CP710-1-B-0-C-080-S2
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. It is available in normally open or normally closed configurations between ports 2 and 3, which shift when the pilot pressure at port 1 overcomes the opposing spring. Due to the atmospheric vent, the pilot pressure required to shift the valve is independent of the pressure in the line between port 2 and port 3. 

Description: CP710-1-B-0-O-080-S2
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. It is available in normally open or normally closed configurations between ports 2 and 3, which shift when the pilot pressure at port 1 overcomes the opposing spring. Due to the atmospheric vent, the pilot pressure required to shift the valve is independent of the pressure in the line between port 2 and port 3. 

Description: CP712-11-U-0-C-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Description: CP712-11-U-0-O-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Description:  PTS1-10-0-40
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Description:  PTS1-10-0-80
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Description:  PTS1-10-0-160
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Description: PTS3-10-0-40
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description: PTS3-10-0-80
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description: PTS3-10-0-160
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description: PTS12-10N-0-80-00
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm]
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank.

Description: PTS12-10N-0-160-00
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm]
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank.

Description: 3CP2-1.5S
Function: Manual Push Valve, 2-Way, Normally Closed, Poppet Type with Check
Manual Push Valve, 2-Way, Normally Closed, PoppetType with Check 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a 2-way, normally closed, restricted, poppet type, push to open directional control valve. In the normal position, flow is blocked from 1 to 2. When the knob is manually pushed downward, port 1 is connected to port 2 through a pre-determined orifice. This valve is ideal for emergency lowering applications. It is not recommended to flow from port 2 to port 1. If this is needed, please consult the factory.