Directional
There are 157 products.
566449 - LOGIC ELEMENT - DPS2-10-B-F-0-80 - DANFOSS
Logic Element, Normally Closed, Poppet Type, Vent to Open
350 bar [5000 psi] • 60 l/min [16 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, vent to open, poppet type logic element with port 1 connected to port 3 through an orifice. By opening port 3 to tank, flow can pass from port 1 to port 2 or from port 2 to port 1. Closing port 3 will prevent the valve from opening from port 1 to port 2, but flow can still take place from port 2 to port 1. The area ratio between port 1 and 3 is 1:2 and the ratio between port 1 and 2 is also 1:2. By controlling the flow or pressure out of port 3, the valve can be used as an on/off valve or in a pressure control function.
350 bar [5000 psi] • 60 l/min [16 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, vent to open, poppet type logic element with port 1 connected to port 3 through an orifice. By opening port 3 to tank, flow can pass from port 1 to port 2 or from port 2 to port 1. Closing port 3 will prevent the valve from opening from port 1 to port 2, but flow can still take place from port 2 to port 1. The area ratio between port 1 and 3 is 1:2 and the ratio between port 1 and 2 is also 1:2. By controlling the flow or pressure out of port 3, the valve can be used as an on/off valve or in a pressure control function.
138459 - LOGIC ELEMENT - CP701-1-B-0-190 - DANFOSS
Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits.
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits.
131440 - LOGIC ELEMENT - CP701-1-B-0-080 - DANFOSS
Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits.
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits.
805314919 - 2-WAY - SVP08-NC-00-00-B-00 - DANFOSS
Solenoid Valve, 2-way, Poppet Type, Normally Closed, Pilot Operated 230 bar
[3300 psi] • 35 l/min [9 US gpm]
OPERATION AND DESCRIPTION
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 but is restricted in the opposite direction. Some models have the option of a filter at port 2. Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position and bypass excess oil to tank
[3300 psi] • 35 l/min [9 US gpm]
OPERATION AND DESCRIPTION
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 but is restricted in the opposite direction. Some models have the option of a filter at port 2. Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position and bypass excess oil to tank
130504 - LOGIC ELEMENT - CP701-1-B-0-050 - DANFOSS
Logic Element, Normally Closed, Spool Type, Pilot-to-Close350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATIONThis is a 3-port, normally closed, spool-type logic element with pilot-to-close functionality.When port 3 is open to tank, flow is allowed from port 1 to port 2.Flow from port 1 to port 2 is otherwise blocked unless the pressure at port 1 exceeds the spring setting.
Applying pilot pressure to port 3 increases the required opening pressure at port 1 at a 1:1 ratio.
This valve is ideal for use as a pressure compensator, bypass valve, or pilot-to-close element in regenerative hydraulic circuits.
DESCRIPTION AND OPERATIONThis is a 3-port, normally closed, spool-type logic element with pilot-to-close functionality.When port 3 is open to tank, flow is allowed from port 1 to port 2.Flow from port 1 to port 2 is otherwise blocked unless the pressure at port 1 exceeds the spring setting.
Applying pilot pressure to port 3 increases the required opening pressure at port 1 at a 1:1 ratio.
This valve is ideal for use as a pressure compensator, bypass valve, or pilot-to-close element in regenerative hydraulic circuits.
805314019 - 3-WAY - SV10-23-01-00-00-B-00 - DANFOSS
Solenoid Valve, 3-way, 2-position, Spool Type
230 bar [3300 psi] • 35 l/min [9 US gpm]
This is a 3-way, 2-position, spool type, direct acting solenoid valve. In the de-energized condition, port 1 is open to port 2 and port 3 is blocked. When energized, port 3 is open to port 1 and port 2 is blocked. These valves can be used in normally open, normally closed or selector modes. They come standard with a push pin manual override. Always check the operating envelope to make sure the valve will work under the required application conditions.
230 bar [3300 psi] • 35 l/min [9 US gpm]
This is a 3-way, 2-position, spool type, direct acting solenoid valve. In the de-energized condition, port 1 is open to port 2 and port 3 is blocked. When energized, port 3 is open to port 1 and port 2 is blocked. These valves can be used in normally open, normally closed or selector modes. They come standard with a push pin manual override. Always check the operating envelope to make sure the valve will work under the required application conditions.
131542 - LOGIC ELEMENT - CP701-1-B-0-100 - DANFOSS
Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits
132809 - LOGIC ELEMENT CP300-4-B-0-0-190 - DANFOSS
Description: CP300-4-B-0-0-190
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
131976 - LOGIC ELEMENT CP300-4-B-0-0-150 - DANFOSS
Description: CP300-4-B-0-0-150
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
134196 - LOGIC ELEMENT CP300-4-B-0-0-110 - DANFOSS
Description: CP300-4-B-0-0-110
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
132736 - LOGIC ELEMENT CP300-4-B-0-0-080 - DANFOSS
Description: CP300-4-B-0-0-080
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
Pressure Compensator, Restrictive Type 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 3-ported spool valve, where port 3 is connected to port 2 and port 1 is the pilot port. The spring chamber is connected to port 3 through an orifice. When port 3 is connected to the outlet of a control orifice and port 1 is connected upstream of the orifice, the valve functions as a restrictive pressure compensator. When the pressure drop across the orifice is equal to the spring set pressure, the spool restricts flow from port 3 to port 2 and compensates for any change in pressure difference across the valve.
404AA00005A - SHUTTLE 1SH10 - DANFOSS
Description: 1SH10
Load Shuttle Valve, Insert type 3S0 bar [S000 psi] • 20 I/min [S US gpm]
This valve senses the higher of two input pressures at 1 and 3, and routs it to output 2.
Load Shuttle Valve, Insert type 3S0 bar [S000 psi] • 20 I/min [S US gpm]
This valve senses the higher of two input pressures at 1 and 3, and routs it to output 2.