Danfoss

Description: 1CE30F20S10
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 30 I/min [8 US gpm] 

Description: 1SE30F20S10
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 30 I/min [8 US gpm] 

Description: 1CE30F20S2
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 30 I/min [8 US gpm] 

Description: 1UPS100P20S
Kick-Down Sequence Valve, Pilot Operated, Spool Type, Internal Pilot, External Drain 350 bar [S000 psi]• 1S0 I/min [40 US gpm] 
This is a pilot operated, spool type sequence valve that opens from port 1 to port 2 when the setting is reached. It then automatically vents the main spool, causing the inlet pressure in port 1 to fall to the pressure in port 2. Sometimes known as a'kick-down'valve, it can be used to sequence operations in a system limiting pressure loss, where the pressure in the second operation is much lower than the first. 

Description: PRV1-10-S-0-6/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: PRV1-10-S-0-12/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: MPV1-10-K-0 
Function: Manual Pull Valve, 2-Way, Normally Closed, Poppet Type
Manual Pull Valve, 2-Way, Normally Closed, PoppetType 210 bar [3000 psi]• 45 I/min [12 US gpm] 
This is a 2-way, normally closed, poppet type, pull to open directional control valve. In the normal position, flow is blocked from 2 to 1, while free reverse flow takes place from port 1 to 2 after overcoming the spring bias. When the knob is manually pulled upward, port 1 is connected to port 2 allowing free flow in both directions. This valve is ideal for emergency lowering applications. 

Description:  NV1-10-K-0 
Needle valve, Fully Adjustable, Fine Metering 210 bar [3000 psi]• 45 I/min [12 US gpm] 
This needle valve with fine metering is a variable orifice used to create a pressure drop when flow passes from port 1 to 2 or port 2 to 1. Clockwise rotation of the adjustment screw decreases the flow setting until it is completely closed. 

Description: DPS2-10-P-F-0-80
Logic Element, Normally Closed, Spool Type, Pilot to Close 290 bar [4200 psi]• 60 I/min [16 US gpm] 
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits. 

565621 - SHUTTLE - DSV1-10-B-0 - DANFOSS

Description:  PTS1-10-0-80
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Relief valve, Direct Acting, Poppet Type
250 bar [3600 psi] • 30 l/min [8 US gpm]
DESCRIPTION AND OPERATION
This is a direct acting, poppet type relief valve that relieves from port 1 to 2. It can be used as a cost-effective main relief or to protect an actuator from over-pressurization