List of products by brand Danfoss

Description: PRV1-10-S-0-12/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: MPV1-10-K-0 
Function: Manual Pull Valve, 2-Way, Normally Closed, Poppet Type
Manual Pull Valve, 2-Way, Normally Closed, PoppetType 210 bar [3000 psi]• 45 I/min [12 US gpm] 
This is a 2-way, normally closed, poppet type, pull to open directional control valve. In the normal position, flow is blocked from 2 to 1, while free reverse flow takes place from port 1 to 2 after overcoming the spring bias. When the knob is manually pulled upward, port 1 is connected to port 2 allowing free flow in both directions. This valve is ideal for emergency lowering applications. 

Description:  NV1-10-K-0 
Needle valve, Fully Adjustable, Fine Metering 210 bar [3000 psi]• 45 I/min [12 US gpm] 
This needle valve with fine metering is a variable orifice used to create a pressure drop when flow passes from port 1 to 2 or port 2 to 1. Clockwise rotation of the adjustment screw decreases the flow setting until it is completely closed. 

Description: DPS2-10-P-F-0-80
Logic Element, Normally Closed, Spool Type, Pilot to Close 290 bar [4200 psi]• 60 I/min [16 US gpm] 
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits. 

Description:  PTS1-10-0-80
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Description: RV5-10-K-0-50/
Function: Pilot operated pressure relief valve spool type with handknob with locknut
Relief valve, Pilot operated, Spool Type 350 bar [5000 psi] • 114 l/min [30 US gpm]
This is a pilot operated, spool type relief valve that relieves from port 1 to port 2. It can be used to limit pressure in a system while maintaining accurate pressure control with constant or varying flows.

Description: PRV1-10-S-0-2/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: PRV1-10-S-0-24/
Pressure Reducing Valve, Relieving, Direct Acting 210 bar [3000 psi]• 15 I/min [4 US gpm]
This is a normally open, direct acting pressure reducing valve. Port 2 
is open to port 1 until the setting is reached. at which time the valve throttles the outlet flow limiting the pressure at port 1. If the outlet pressure rises due to an external force, then the valve will open port 1 to port 3 acting as a relief valve. This valve is ideal for use in brake circuits where low leakage is important. 

Description: PSV10-10-S-0-24
Function: Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, External Drain
Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, External Drain 210 bar [3000 psi]• 23I/min [6 US gpm] 
This is a hydraulically pilot operated spool valve, normally closed from port 2 to 3 with port 4 as a drain port connected to tank. When the pilot pressure on port 1 reaches the setting, the valve will begin to open port 2 to 3. This is ideal for sensing pressure in a remote area of a circuit to sequence another operation

Description: DPS2-10-P-F-0-160
Logic Element, Normally Closed, Spool Type, Pilot to Close 290 bar [4200 psi]• 60 I/min [16 US gpm] 
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits. 

Description: PTS3-10-0-80
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description:  PTS1-10-0-160
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve.