Danfoss

Description: CP448-1-B-0-E-A-XXX-8.0-040
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi]• 19I/min [SUS gpm] 

Compatible With:Ikontrol Family
Using Danfoss Spare Parts you can guarantee maximum reliability for your equipment, maximizing productivity and performance.
* Image for illustration purposes only

Description: CP712-11-U-0-O-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Needle Valve, Fully Adjustable, Fine Metering with Reverse Free Flow
350 bar [5000 psi] • 55 l/min [14 US gpm]
DESCRIPTION AND OPERATION
This is a needle valve with a reverse free flow check. It is a variable orifice used to create a pressure drop when flow passes from port 2 to 1, while allowing free flow when flow passes from 1 to 2. Clockwise rotation of the adjustment screw decreases the flow setting until it is completely closed. The setting can be locked by tightening lock nut or knob on the adjustment screw

Description: CP712-11-U-0-C-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Logic Element, Normally Closed, Spool Type, Pilot to Close
350 bar [5000 psi] • 150 l/min [40 US gpm]
DESCRIPTION AND OPERATION
This is a 3-ported, normally closed, pilot to close spool type logic element. By opening port 3 to tank, flow can pass from port 1 to port 2. Flow is blocked from port 1 to port 2 unless the pressure is high enough in port 1 to overcome the spring set pressure. Applying pressure to port 3 will increase the pressure required in port 1 to open the valve by a factor of 1 to 1. This valve is ideal for use as a pressure compensator, bypass valve, or a pilot to close valve in regenerative circuits.

CP342-3-U-0-2020
Flow Divider/Combiner, Fixed Ratio, Flow Synchronizing Option

2F95-01-B-8S-E-15.0

Description:  CP240-5-B-0-E-C-XXX
Function: Sequence Valve, Normally Open, Spool Type, Hydraulic Pilot, External Drain
Sequence Valve, Normally Open, Spool Type, Hydraulic Pilot, External Drain 210 bar [3000 psi]• 25 I/min [7 US gpm] 
This is a hydraulically pilot operated spool valve, normally open from port 2 to 3 with port 4 as a drain port connected to tank. When the pilot pressure on port 1 reaches the setting, the valve will begin to close port 2 to 3. This is ideal for sensing pressure in a remote area of a circuit to sequence another operation. 

Solenoid Valve, 3-Way, 2-Position, Spool Type240 bar [3500 psi] • 60 l/min [16 US gpm]
OPERATION AND DESCRIPTIONThis is a 3-way, 2-position, direct-acting solenoid valve with a spool-type design.In the de-energized state, port 1 is open to port 2, while port 3 is blocked.When energized, port 3 is open to port 1, and port 2 is blocked.
These valves can be configured for normally open, normally closed, or selector functions.They feature an open transition during shifting, which helps reduce pressure spikes when changing flow direction.

Always verify the valve’s operating parameters to ensure suitability for your specific application.

171103119 - COIL  C13-24D-18W-DN - DANFOSS

Description: M16-110A-26W-DN
Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier