Electro Proportional

This valve is designed for low leakage applications and can be used in a circuit with a single acting cylinder to control motion, provide load holding or as a general purpose diverter or dump valve.
Download the Data Sheet for further technical information, you can find it in the product sheet.

Solenoid valve on/off Pilot operated  - Poppet Type Normally Open

SVP10-NO
Solenoid Valve, 2-way, Poppet Type, Normally Open, Pilot Operated
230 bar [3300 psi] • 80 l/min [21 US gpm]
This is a 2-way, 2-position, poppet type, pilot operated, normally open solenoid valve. In its de-energized condition, flow can take place from port 2 to 1 but is restricted in the other direction. When energized, flow can take place from port 1 to 2 but is blocked in the other direction. Leakage is kept to a minimum due to the poppet design. Some models have the option of a filter around port 2, and these come standard with a push pin manual override. These valves can be used to hold loads in position when energized or bypass excess oil to tank in a fail-safe way.

CV08-NP
Check Valve, Standard Direction
350 bar [5000 psi] • 38 l/min [10 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

EVH 06/D5-00-00-SPS-00 - Poppet Type 3-Way 2-Position