Danfoss

Description: R13-12D-16W-DE-D
Function: R13 Deutsch Diode
Specifications:
• Duty cycle: 100% at 133% of rated voltage and 70°C [158°F]
• Magnet wire insulation: (200°C)
• Ambient temperature range: -40 to +70 °C [-40 to 158 °F]
• Environmental rating: IP69K: AS, DE, FL and M3
• Input voltage range: 75% to 133% of rated voltage
• Optional bi-directional, transient voltage suppression diodes: Non polarity dependent, 51 volt nominal breakdown voltage.
• Weight: 0.22 kg [0.49 lb]

Description: VDP 06/NC-EN-1-00-XXX
Sequence Valve, Normally Closed, Spool Type, Hydraulic Pilot, Atmospheric Vent 315 bar [4600 psi]• 25 I/min [7 US gpm] 
This is a hydraulically pilot operated spool valve, normally closed from port 2 to 3 with an atmospheric vent. When the pilot pressure on port 1 reaches the setting, the valve will begin to open port 2 to 3. This is deal for sensing pressure in a remote area of a circuit to sequence another operation. 

Pilot Operated Check Valve, Port 1 Pilot to open with Drain
315 bar [4600 psi]  30 l/min [8 US gpm]
DESCRIPTION AND OPERATION
This is a pilot operated check valve with a separate drain. Free flow takes place from port 3 to 4 and is blocked from port 4 to 3 until pilot pressure is applied to port 1. Port 2 is drained to tank to remove any effect of pressure in port 3 affecting the pilot pressure required to keep the valve open.

Description: EVH 06/D5-00-00-00
Function: 3 WAY-2 POS ON-OFF POPPET VALVE
Solenoid Valve, 3-way, 2-position, Poppet Type 230 bar [3300 psi] • 25 l/min [6.6 US gpm]
This is a 3-way, 2-position, poppet type, direct acting solenoid valve. When de-energized, the valve blocks flow from port 3 while allowing flow between port 1 and 2. When energized, the valve poppet blocks flow from port 1 while allowing flow between port 2 and 3. These valves come standard with a push pin manual override. This valve is ideal for low leakage requirements to hold a load in position.

Description: VDP 06/4201-EN-1-00-XXX 
Sequence Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 315 bar [4600 psi]• 23I/min [6 US gpm] 
This is a hydraulically pilot operated spool valve where port 4 is closed and port 2 is open to port 3 in the neutral position. Pilot pressure is applied to port 1 and the spring chamber is referenced to atmosphere. When the pressure on port 1 reaches the setting, port 2 will begin to close and port 4 is opened to port 3. This valve can be used normally closed, normally open or as a diverter valve. 

Pilot Operated Check Valve, Port 1 Pilot to Open
350 bar [5000 psi] • 35 l/min [9 US gpm]
DESCRIPTION AND OPERATION
This is a pilot operated check valve where free flow takes place from port 2 to 3 and is blocked from port 3 to 2 until pilot pressure is applied to port 1.

Description: EVK 06/C5-00-00-00
Solenoid Valve, 2-way, Poppet Type, Normally Closed, Direct Acting, Double Blocking 210 bar [3000 psi] • 40 l/min [10.6 US gpm]
This is a 2-way, 2-position, poppet type, direct acting, normally closed, bi-directional solenoid valve. In its de-energized condition, flow is blocked in both directions. Leakage in either direction is kept to a minimum due to the poppet design. When energized, flow can take place from port 2 to 1 and from 1 to 2. These valves come standard with a push pin manual override. These valves can be used to hold loads in position or interrupt a pressure line where flow is expected to pass in both directions in the de-energized condition. They do not suffer from momentary opening due to shock pressures.

Solenoid Valve, 2-way, Spool Type, Normally Open
230 bar [3300 psi] • 16 l/min [4.2 US gpm]
OPERATION AND DESCRIPTION
This is a 2-way, 2-position, spool type, direct acting, normally open solenoid valve. When de-energized, flow can take place from port 2 to 1 and from 1 to 2. In its energized condition, flow is blocked in both directions. The valve will be subject to normal spool leakage dependent on the pressure dfference between the ports. They come standard with a push pin manual override. These valves can be used to interrupt a pressure line where flow is expected to pass in both directions in the energized condition. 

Description: SV08-22-02-00-00-B-00
Function: 2 WAY-2 POS ON-OFF SPOOL VALVE
Solenoid Valve, 2-way, Poppet Type, Normally Closed, Pilot Operated with Reverse Free Flow 230 bar [3300 psi] • 18 l/min [4.7 US gpm]
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition flow is blocked in both directions. When energized, flow can take place from port 2 to 1 and from 1 to 2. The value will be subject to normal spool leakage dependent on the pressure difference between the ports. These valves can be used to interrupt a pressure line where flow is expected to pass in both directions in the de-energized condition.

Description: SV08-23-01-00-00-B-00
Function: 3 WAY-2 POS ON-OFF SPOOL VALVE 
Solenoid Valve, 3-way, 2 position, spool type 230 bar 3300 psi] • 18 l/min [4.8 US gpm]
This is a 3-way  2 position, spool type, direct acting solenoid valve. In the de-energized condition, port 1 is open and port 2 and port 3 is blocked. When energized, port 3 is open to port 1 and port 2 is blocked. These valvea can be used in normally open, normally closed or sector modes. THer come standard with a push pin manual overide. Always check the operating enevelope to make sure the valve will work under the required application conditions. 

Description: SV08-23-03-00-00-B-00
Function: 3 WAY-2 POS ON-OFF SPOOL VALVE
Solenoid Valve, 3-way, 2-position, Spool Type230 bar [3300 psi]• 181/min [4.7 US gpm] 
This is a 3-way, 2-position, spool type, direct acting solenoid valve. In the de-energized condition, port 1 is open to port 2 and port 3 is blocked. When energized, port 3 is open to port 2 and port 1 is blocked. These valves can be used in normally open, normally closed or selector modes. They come standard with a push pin manual override. Always check the operating envelope to make sure the valve will work under the required application conditions. 

Description: SV08-34-04-00-00-B-00
Function: 4 WAY-3 POS ON-OFF SPOOL VALVE
Solenoid Valve, 4-way, 3-position, Spool Type 230 bar [3300 psi] • 8 l/min [2 US gpm]
This is a 4-way, 3-position, spool type, direct acting solenoid valve. In the center condition, ports 2 and 4 are closed while port 3 is connected to port 1. By energizing one coil, port 3 opens to 2 and port 4 to 1. When energizing the other coil, port 3 opens to 4 and port 2 to 1. This valve provides a directional control function with a neutral de energized state allowing the inlet flow to pass to tank or to another function while the work ports are blocked. It can be used in any hydraulic application where an actuator needs to be controlled in both directions.