Danfoss

Proportional Relief Valve, Spool Type, Pilot Operated, Normally Open
315 bar [4500 psi] • 50 l/min [13 US gpm]
DESCRIPTION AND OPERATION
This is a pilot operated, spool type, normally open, proportional relief valve. In the de-energized condition, the pressure setting will be at a minimum. As current is applied to the coil, the pressure setting of the valve will increase proportionally. This valve is ideal for system pressure control where flows may vary

Description: PSV10-NC-40-00-00-B-00
Function: Proportional Flow Control Valve, Spool Type, Normally Closed, Direct Acting, Non-Compensated
Proportional Flow Control Valve, Spool Type, Normally Closed, Direct Acting, Non-Compensated 260 bar [3800 psi]• 40 I/min [10.6 US gpm] 
This is a 2-way, spool type, normally closed, non-compensated proportional flow control valve. In the de-energized condition, flow is blocked in both directions. Energizing the coil will proportionally open port 1 to 2. Used in conjunction with a compensator, the valve will act as the control orifice for a pressure compensated flow regulator. 

Proportional Flow Control Valve, Normally Closed, Priority Type, Pressure Compensated
260 bar [3800 psi] • 65 l/min [17 US gpm]
DESCRIPTION AND OPERATION
This is a 3-way, spool type, normally closed, priority type, pressure compensated proportional flow control valve. In the de-energized condition, flow is blocked from port 1 to the priority port 3 and all flow passes from port 1 to 2. Energizing the coil will proportionally move the spool, opening a variable orifice from port 1 to 3, while excess flow passes to port 2. An internal compensating spool ensures that the output flow at port 3 remains constant, regardless of changes in differential pressure between port 1 and 3 or pressure at the bypass port 2. Increasing the current to the coil will increase the priority outlet flow.

Sequence Valve, Normally Closed, Spool Type, Internal Pilot, Internal Drain
210 bar [3000 psi] • 8 l/min [2 US gpm]
DESCRIPTION AND OPERATION
This is a three ported sequence valve, where pressure sensed at port 1 will shift valve and open port 1 to port 2. Port 3 should always be referenced to tank. This is ideal for use as a brake release valve in a transmission circuit.

Description: NCS 04/2

Description:  NCS 06/3

Description: CP10-B-3-B 

Alluminium housing NCS06/3-SE 3/8 (D) Danfoss ex Comatrol 

Cavity: SDC10-2
The Housings are made with alluminum and ductile iron housings for single or multiple applications.