Home

PVG 32
Proportional flow and pressure control
Up to 12 modules
Various types of controls (hydraulic, manual, electric)
CAN BUS controls (CAN OPEN and ISOBUS protocols)
Reduced weight
*Image for illustration purposes only

Orbital Motors
We provide a wide range of hydraulic motors of different types, sizes, and with different versions of outlet shaft. The range includes motors with displacements from 8 to 800 cc/rpm. The speed may vary approximately from 2500 rpm/min for the smallest motor up to 600 rpm/min for the largest one.
* Image for illustration purposes only

SVP10-NO
Solenoid Valve, 2-way, Poppet Type, Normally Open, Pilot Operated
230 bar [3300 psi] • 80 l/min [21 US gpm]
This is a 2-way, 2-position, poppet type, pilot operated, normally open solenoid valve. In its de-energized condition, flow can take place from port 2 to 1 but is restricted in the other direction. When energized, flow can take place from port 1 to 2 but is blocked in the other direction. Leakage is kept to a minimum due to the poppet design. Some models have the option of a filter around port 2, and these come standard with a push pin manual override. These valves can be used to hold loads in position when energized or bypass excess oil to tank in a fail-safe way.

Description: PV000349
Function: Connector for DIN Coil 24V DC with integrated diode, no LED

Motors with corrosion resistant parts
Motors with integrated brake
Motors with speed sensor
Robust cardan shaft for longer life in demanding applications
*image for illustration purposes only

The integrated pulse-snubber offers a high degree of protection against cavitations and liquid hammer, and the well thought out design results in excellent vibration stability and an exceptional robustness.
The flexible pressure transmitter program covers different output signals, absolute and gauge (relative) versions, measuring ranges from 0 – 1 to 0 – 600 bar and a wide range of pressure and electrical connections.
Excellent vibration stability, robust construction, and a high degree of EMC/EMI protection equip the pressure transmitter to meet the most stringent industrial requirements.

Needle Valve, Fully Adjustable, Fine Metering with Reverse Free Flow
350 bar [5000 psi] • 55 l/min [14 US gpm]
DESCRIPTION AND OPERATION
This is a needle valve with a reverse free flow check. It is a variable orifice used to create a pressure drop when flow passes from port 2 to 1, while allowing free flow when flow passes from 1 to 2. Clockwise rotation of the adjustment screw decreases the flow setting until it is completely closed. The setting can be locked by tightening lock nut or knob on the adjustment screw

Using Danfoss Genuine Parts you can guarantee maximum reliability for your equipment, maximizing productivity and performance.
By using non-original spare parts you will save on cost but a negative impact on the performance and strength of your equipment.
Why use original Danfoss spare parts?

Description: CV10-NP-1-B-00 (NEW)
Function: Check valve 1bar
Check Valve, Standard Direction 350 bar [5000 psi]• 801/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes piace from port 1 to 2 and is blocked from port 2 to 1.

Description: CV10-NP-2-B-00 (NEW)
Function: Check valve 2bar
Check Valve, Standard Direction 350 bar [5000 psi]• 801/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes piace from port 1 to 2 and is blocked from port 2 to 1.

Description: CV10-NP-7-B-00 (NEW)
Function: Check valve 7bar
Check Valve, Standard Direction 350 bar [5000 psi]• 801/min [21 US gpm]
DESCRIPTION AND OPERATION
This is a check valve where free flow takes piace from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-5.0
Function: Check valve <1bar

Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-20
Function: Check valve 1bar
Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-40
Function: Check valve 3bar
Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.

Description: CV11-12-P-0-80
Function: Check valve 5bar
Check valve, Standard Direction 350 bar [5000psi] - 114/min [30 US gpm] 
Description and operation: this is a Check valve where free flow takes place from port 1 to 2 and is blocked from port 2 to 1.