Hydraulic Valves

Description: 1CE90F35S8
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 90 I/min [24 US gpm] 

Description: 1CE90F20S4
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 90 I/min [24 US gpm] 

Description: 1CE90F20S8
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 90 I/min [24 US gpm] 

Description: 1SE30F35S2
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 30 I/min [8 US gpm] 

Description: 1SE30F35S5
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 30 I/min [8 US gpm] 

Description: 1SE30F20S10
OvercenterValve, Standard, Direct Acting, Internal Drain, Port 3 Pilot 350 bar [S000 psi] • 30 I/min [8 US gpm] 

Description:PPR09-POD-20-00-00-B-00
Proportional Pressure Reducing, Relieving, Pilot Operated, Normally Open to Drain 50 bar [725 psi] • 25I/min [6.6 US gpm] 
This is a pilot operated, proportional pressure reducing/ relieving valve.In the de-energized condition, the inlet port 2 is blocked, while the reduced pressure in port 3 will be at the minimum setting and open to the tank port 4.By energizing the coil, the pressure in port 3 will increase proportionally to the current applied.Flow through port 2 to 3 is restricted to limit the pressure in port 3.In the case of over pressurization in port 3,the spool will open port 3 to port 4, which acts as a relief valve to limit the pressure in port 3.These valves are ideal for clutch control or as pilot valves for large directional control valves. 

Description:PPR09-POD-25-00-00-B-00
Proportional Pressure Reducing, Relieving, Pilot Operated, Normally Open to Drain 50 bar [725 psi] • 25I/min [6.6 US gpm] 
This is a pilot operated, proportional pressure reducing/ relieving valve.In the de-energized condition, the inlet port 2 is blocked, while the reduced pressure in port 3 will be at the minimum setting and open to the tank port 4.By energizing the coil, the pressure in port 3 will increase proportionally to the current applied.Flow through port 2 to 3 is restricted to limit the pressure in port 3.In the case of over pressurization in port 3,the spool will open port 3 to port 4, which acts as a relief valve to limit the pressure in port 3.These valves are ideal for clutch control or as pilot valves for large directional control valves. 

Description: 1SER30F35S4
OvercenterValve, Part Balanced, Direct Acting, Internal Drain, Port 3 350 bar [S000 psi] • 30 I/min [8 US gpm] 

Description: MM-OMT-00-PVLP-S4B

Distributors can choose from two standard dual body designs for multi-function circuits.
These dual bodies will be available in both cross port and parallel circuit types.
Threaded plug options are included to allow for design flexibility.
Four sizes are available to house -8, -10, -12, and -16 two-way cartridges.
Aluminum and steel versions with SAE or BSP ports can be selected.
• Bodies designed for Two, 2-way Cartridges
• Cross-Port and Parallel Designs
• -8, -10, -12, -16 Body Sizes
• Aluminum and Steel • SAE and BSP Porting
• Threaded Plug Options Available for More Flexibility (Parallel Bodies)

Coils and Electrnics
M19 - 22W Proportional Coil
PERFORMANCE DATA:
Magnet wire insulation: 200°C [392°F]
Maximum Continuous Current: 1.8 A [at 12V] 0.9 A [at 24V]
Ambient temperature range: -20 to 40°C [-4 to 104 °F]

Description: RPC04-2.5-OR-00
Pilot Operated Check Valve, Port 1 Pilot to Open 350 bar [5000 psi] • 21 l/min [5.5 US gpm] 
This is a pilot operated check valve where free flow takes place from port 2 to 3 and is blocked from port 3 to 2 until pilot pressure is applied to port 1.

Coils and Electronics
R16 - 20W Robust Coil
PERFORMANCE DATA:
Duty cycle: 100% at 133% of rated voltage and 70°C [158° F]
Magnet wire insulation: 200°C [392° F]
Ambient temperature range: -40 to +70 °C [-40 to 158 °F]
Input voltage range: 75% to 133% of rated voltage

Coils and Electronics
R16 - 20W Robust Coil
PERFORMANCE DATA:
Duty cycle: 100% at 133% of rated voltage and 70°C [158° F]
Magnet wire insulation: 200°C [392° F]
Ambient temperature range: -40 to +70 °C [-40 to 158 °F]
Input voltage range: 75% to 133% of rated voltage

Description: D14E-12D-1.8A-DE 
• Magnet wire insulation: (200°C)
• Maximum continuous current 1.8 A (at 12 V) 0.9 A (at 24 V)
• Ambient temperature: -40 to 50 °C [-40 to 122 °F]
• Environmental protection: IP69K: DE and FL connectors IP67: AJ and AS connectors IP65: all other connectors
• Used only on proportional valves with current control 

Description: D14E-24D-0.9A-DE
• Magnet wire insulation: (200°C)
• Maximum continuous current 1.8 A (at 12 V) 0.9 A (at 24 V)
• Ambient temperature: -40 to 50 °C [-40 to 122 °F]
• Environmental protection: IP69K: DE and FL connectors IP67: AJ and AS connectors IP65: all other connectors
• Used only on proportional valves with current control 

171184419 - COIL - M16-220RA-22W-DN

Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier

Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier

Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier

Specification:
Duty cycle: 100% at 115% of rated voltage at 40°C [104°F]
Magnet wire insulation: (200°C)
Ambient temperature range: -20 to 40 °C [-4 to 104 °F]
Environmental protection rating: IP69K: DE IP67: AJ , AS, and M3 term IP65: FL and DN
Input voltage range: 85% to 115% of rated voltage
Temperature rise at 115% of rated voltage: 130°C [266°F] above ambient
AC coils require external rectier

Coils and Electrnics
M19 - 22W Proportional Coil
PERFORMANCE DATA:
Magnet wire insulation: 200°C [392°F]
Maximum Continuous Current: 1.8 A [at 12V] 0.9 A [at 24V]
Ambient temperature range: -20 to 40°C [-4 to 104 °F]

Coils and Electrnics
M19 - 22W Proportional Coil
PERFORMANCE DATA:
Magnet wire insulation: 200°C [392°F]
Maximum Continuous Current: 1.8 A [at 12V] 0.9 A [at 24V]
Ambient temperature range: -20 to 40°C [-4 to 104 °F]