Hydraulic Valves

Description: SV08-23-03-00-00-B-00
Function: 3 WAY-2 POS ON-OFF SPOOL VALVE
Solenoid Valve, 3-way, 2-position, Spool Type230 bar [3300 psi]• 181/min [4.7 US gpm] 
This is a 3-way, 2-position, spool type, direct acting solenoid valve. In the de-energized condition, port 1 is open to port 2 and port 3 is blocked. When energized, port 3 is open to port 2 and port 1 is blocked. These valves can be used in normally open, normally closed or selector modes. They come standard with a push pin manual override. Always check the operating envelope to make sure the valve will work under the required application conditions. 

Description: SV08-34-04-00-00-B-00
Function: 4 WAY-3 POS ON-OFF SPOOL VALVE
Solenoid Valve, 4-way, 3-position, Spool Type 230 bar [3300 psi] • 8 l/min [2 US gpm]
This is a 4-way, 3-position, spool type, direct acting solenoid valve. In the center condition, ports 2 and 4 are closed while port 3 is connected to port 1. By energizing one coil, port 3 opens to 2 and port 4 to 1. When energizing the other coil, port 3 opens to 4 and port 2 to 1. This valve provides a directional control function with a neutral de energized state allowing the inlet flow to pass to tank or to another function while the work ports are blocked. It can be used in any hydraulic application where an actuator needs to be controlled in both directions.

Description: SV10-24-12-00-00-B-00
Function: 4 WAY-2 POS ON-OFF SPOOL VALVE
Solenoid Valve, 4-way, 2-position, Spool Type 230 bar [3300 psi] • 25 l/min [6.6 US gpm]
This is a 4-way, 2-position, spool type, direct acting solenoid valve. In the de-energized condition, port 3 is open to 1 while ports 2 and 4 are blocked. When energized, port 1 is open to 4 and port 2 open to 3. This valve allows the inlet oil to pass through the valve to tank or a separate system while holding the actuator in position. Always check the operating envelope to make sure the valve will work under the required application conditions. Port 1 is not intended as inlet (Tank only).

Description: EVH 06/D5-00-00-00
Function: 3 WAY-2 POS ON-OFF POPPET VALVE
Solenoid Valve, 3-way, 2-position, Poppet Type 230 bar [3300 psi] • 25 l/min [6.6 US gpm]
This is a 3-way, 2-position, poppet type, direct acting solenoid valve. When de-energized, the valve blocks flow from port 3 while allowing flow between port 1 and 2. When energized, the valve poppet blocks flow from port 1 while allowing flow between port 2 and 3. These valves come standard with a push pin manual override. This valve is ideal for low leakage requirements to hold a load in position.

Description: ESVL9-10-E0-0-00-0-A
Function: Proportional Directional Valve, 5-way, 3-position, Spool Type, Non-Compensated
Proportional Directional Valve, 5-way, 3-position, Spool Type, Non-Compensated  250 bar [3600 psi] • 23I/min [6 US gpm] 
This is a 5-way, 3-position, spool type, non-compensated proportional directional valve. In its de- energized condition, all ports are blocked. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 5 to 4 with return flow from port 2 to 3. Increasing the current to the top coil will proportionally open flow from port 5 to 2 with return flow from port 4 to 3. In both cases, port 5 will also be opened to port 1, which acts as the load sense port.

Description: ESVL9-10-F0-0-00-0-A
Function: Proportional Directional Valve, 5-way, 3-position, Spool Type, Non-Compensated
Proportional Directional Valve, 5-way, 3-position, Spool Type, Non-Compensated 250 bar [3600 psi] • 23I/min [6 US gpm]
This is a 5-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, ports 5 and 1 are blocked, while ports 2 and 4 are open to port 3. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 5 to 4 with return flow from port 2 to 3. Increasing the current to the top coil will proportionally open flow from port 5 to 2 with return flow from port 4 to 3. In both cases, port 5 will also be opened to port 1, which acts as the load sense port. 

Description: ESVL9-10-F0-0-00-C-A
Function: Proportional Directional Valve, 5-way, 3-position, Spool Type, Non-Compensated, Load Sense Check
250 bar [3600 psi] • 231/min [6 US gpm] 
This is a 5-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, ports 5 and 1 are blocked, while ports 2 and 4 are open to port 3. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 5 to 4 with return flow from port 2 to 3. Increasing the current to the top coil will proportionally open flow from port 5 to 2 with return flow from port4 to 3. In both cases, port 5 will also be opened to port 1, which acts as the load sense port.

Description: ESVL9-10-E0-0-00-C-A
Function: Proportional Directional Valve, 5-way, 3-position, Spool Type, Non-Compensated, Load Sense Check
250 bar [3600 psi] • 231/min [6 US gpm] 
In its de-energized condition, all ports are blocked. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 5 to 4 with return flow from port 2 to 3. Increasing the current to the top coil will proportionally open flow from port 5 to 2 with return flow from port 4 to 3. In both cases, port 5 will also be opened to port 1, which acts as the load sense port. An integral check valve in port 1 prevents reverse flow and allows separation of the load sense pressures of valves in parallel. 

Description: PSV10-34-05-00-00-22-B-00
Function: Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 

Description: PSV08-34-05-00-00-12-B-00
Function: Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
240 bar [3500 psi]• 12I/min [3.2 US gpm] 

Description: PSV10-34-05-00-00-12-B-00
Function:  Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 

Description: PSV10-34-05-00-00-3-B-00
Function:  Proportional Directional Valve, 4-way, 3-position, Spool Type, Non-Compensated
250 bar [3600 psi] • 221/min [S.8 US gpm] 
This is a 4-way, 3-position, spool type, non-compensated proportional directional valve. In its de-energized condition, port 3 is blocked, while ports 2 and 4 are open to port 1. Increasing the current to the bottom coil will cause the spool to move, proportionally opening flow from port 3 to 2 with return flow passing from port 4 to 1. Increasing the current to the top coil will proportionally open flow from port 3 to 4 with return flow passing from port 2 to 1. Using this as a variable orifice in conjunction with a compensator, the valve will provide compensated flow to an actuator in both directions. 

Description: SV10-35-02-00-00-B-00
Function: Solenoid Valve, 5-way, 3-position, Spool Type
Solenoid Valve, 5-way, 3-position, Spool Type 
230 bar [3300 psi] • 30 I/min [8 US gpm]

Desciption:SV10-35-05-00-00-B-00
Function: Solenoid Valve, 5-way, 3-position, Spool Type
Solenoid Valve, 5-way, 3-position, Spool Type 230 bar [3300 psi] • 30 I/min [8 US gpm] 

Description: CP710-1-B-0-C-080-S2
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. It is available in normally open or normally closed configurations between ports 2 and 3, which shift when the pilot pressure at port 1 overcomes the opposing spring. Due to the atmospheric vent, the pilot pressure required to shift the valve is independent of the pressure in the line between port 2 and port 3. 

Description: CP710-1-B-0-O-080-S2
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 210 bar [3000 psi]• 40 I/min [11 US gpm]
This is a 2-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. It is available in normally open or normally closed configurations between ports 2 and 3, which shift when the pilot pressure at port 1 overcomes the opposing spring. Due to the atmospheric vent, the pilot pressure required to shift the valve is independent of the pressure in the line between port 2 and port 3. 

Description: CP712-11-U-0-C-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Description: CP712-11-U-0-O-080
Function: Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain
Directional Control Valve, 2-Way, Spool Type, Hydraulic Pilot, External Drain 450 bar [6500 psi]• 130 I/min [34 US gpm] 
This is a 2-way, spool type, hydraulically piloted directional control valve with external drain. It is available in normally open or normally closed configurations between ports 2 and 3 that shift when pilot pressure is applied to port 1. Due to the external drain, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. Due to the high pressure rating, this valve is ideal for use in transmission circuits to by-pass flow dividers. 

Description:  PTS1-10-0-40
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Description:  PTS1-10-0-80
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Description:  PTS1-10-0-160
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Atmospheric Vent 
210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an atmospheric vent. In the normal condition, port 2 is connected to port 3 and port 4 is blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 4 with port 2 blocked. During the cross-over transition, all ports are blocked. This valve can be used as a selector valve when combined with a pilot solenoid valve. 

Description: PTS3-10-0-40
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description: PTS3-10-0-80
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank. 

Description: PTS3-10-0-160
Function: Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain
Directional Control Valve, 3-Way, Spool Type, Hydraulic Pilot, Internal Drain 210 bar [3000 psi]• 30 I/min [8 US gpm] 
This is a 3-way, spool type, hydraulically piloted directional control valve with an internal drain. In the normal condition, port 3 is connected to port 4 with port 2 blocked. Pilot pressure at port 1 will cause the valve to shift, connecting port 3 to port 2 with port 4 blocked. During the cross-over transition all ports are blocked. Due to the internal hydraulic vent, the pilot pressure required shift the valve is dependent on the pressure in port 4, which would normally be connected to tank.